PCAN-Diag FD

The PCAN-Diag FD is a handheld device for diagnosis of the communication on a CAN bus. Possibilities for diagnosis are available on the protocol layer by handling CAN 2.0 and CAN FD messages as well as on the physical layer by using the oscilloscope function and further measuring functions for voltage and resistance.

• High-speed CAN
• CAN specifications 2.0 A/B, CAN FD (ISO and non-ISO)
• CAN bus connection via D-Sub, 9-pin
• Display with 800 x 480 pixel resolution
• CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
• CAN bit rates from 25 kbit/s up to 1 Mbit/s
• Power supply via the internal rechargeable batteries or the provided supply unit; charger in the set; optional charging station
• Internal memory card for saving projects. 
• Analysis of CAN networks at the physical and the protocol level
• Automatic bit rate detection based on a fixed value list
• Switchable listen-only mode
• Recording of incoming CAN messages to the internal memory card, if required, with CAN ID filtering
• Playback of trace files
• Transmitting individual CAN frames or CAN frame lists
• Measurement of CAN bus load, displayed by means of a time diagram, switchable display of error frames
• Measurement of the termination of the High-speed CAN bus, even while the system is running
• Switchable CAN termination for the connected bus, depending on the transceiver module used
• Voltage measurement for all pins of the CAN connector (D-Sub)
• Management of device configuration, transmit lists, symbol files, and all recorded data (screenshots, trace, and CSV files) in projects
• Scop function
• Operating temperature range from 0 to 50 °C